John Deere 3010 Series 3110 Electrical PARTS
Starter Motors
-
Starter Motor - 12V, 3Kw (Mahle) suitable for John Deere - AL67897 AL62690 AR70436 Teeth: 10
Tooth Pitch:12.29mm
Flange Ø: 82.5mm
Mounting Angle: -45°
Number Of Mounting Bores: 2
Mounting Points Diameter: 105mm
Bore Ø 1: 13.5mm
Rotation Direction: Clockwise
For Flywheel Depth: 38mm
R 6 243,35 Inc VAT R 5 429,00 Exc VATAvailable 5-10 DaysPart No.93044 -
Starter Motor - 12V, 2.7Kw (Mahle) suitable for John Deere - AL70850 AL41247 AL62690 Teeth: 10
Tooth Pitch: 12.29mm
Flange Ø: 82.5mm
Mounting Angle: -45°
Number Of Mounting Bores: 2
Mounting Points Diameter: 105mm
Bore Ø 1: 13.5mm
Rotation Direction: Clockwise
For Flywheel Depth: 38mm
R 6 463,00 Inc VAT R 5 620,00 Exc VATAvailable 5-10 DaysPart No.93011 -
Gear Reduction Starter Motor - 12V, 3.4Kw (Mahle) suitable for John Deere - AL70850 AL62772 AL39700 Teeth: 10.
Tooth Pitch: 12.29mm.
Flange Ø: 82.5mm.
Mounting Angle: -45°.
Number Of Mounting Bores: 2.
Mounting Points Diameter: 105mm.
Bore Ø 1: 13.5mm.
Rotation Direction: Clockwise.
For Flywheel Depth: 38mm.
R 6 306,60 Inc VAT R 5 484,00 Exc VATAvailable 5-10 DaysPart No.93031 -
Starter Motor suitable for John Deere - AL110597 AL62690 AL62772 Bosch 369 Type.
Power: 3.1kw.
Volts: 12.
Number of Teeth: 10.
Number of Flange Holes: 2.
Bell Opening: Left.R 3 306,25 Inc VAT R 2 875,00 Exc VATOut of stockPart No.5268 -
Starter Motor 12V, 3.1Kw (Mahle) suitable for John Deere - AL110597 AL62690 AL62772 Teeth: 10
Tooth Pitch: 12.29mm
Flange Ø: 82.5mm
Mounting Angle: -45°
Number Of Mounting Bores: 2
Mounting Points Diameter: 105mm
Bore Ø 1: 13.5mm
Rotation Direction: Clockwise
For Flywheel Depth: 38mm
R 6 374,45 Inc VAT R 5 543,00 Exc VATAvailable 5-10 DaysPart No.81130
Starter Accessories
-
Starter Relay - RE164448 suitable for John Deere - RE164448 RE170320 AT68973 4 Pin Relay - StarterR 396,75 Inc VAT R 345,00 Exc VATAvailable 5-10 DaysPart No.75679
Alternator
-
Alternator 14V, 65 Amps (Mahle) suitable for John Deere - Belt Pulley Ø: 80mm
Number Of Belts:1
Rotation Direction: Clockwise
Bore Ø: 8.2mm
Mounting Bores Distance:56 mm
Mounting Points Diameter: 86mm
Distance From Pulley To Alternator: 27.9 mm
R 3 583,40 Inc VAT R 3 116,00 Exc VATAvailable 5-10 DaysPart No.97022
Heater Plug
-
Heater Plug suitable for John Deere - RE502079 Heater PlugR 331,20 Inc VAT R 288,00 Exc VATAvailable 5-10 DaysPart No.1553
-
Heater Plug - RE29658 suitable for John Deere - RE29658 RE502079 38099298 7/8 UNF Thread - 12VR 317,40 Inc VAT R 276,00 Exc VATAvailable 5-10 DaysPart No.75682
Sensors
-
Water Volume Sensor RE503242 suitable for John Deere - RE503242 Water volume sensor.Dimensions as follows-Height - 0.96 inchesLength - 5 inchesR 423,20 Inc VAT R 368,00 Exc VATOut of stockPart No.75696
Beacons
-
Beacon Bracket suitable for John Deere - Supplied with weather rubber cap for when beacon not in place.
Anodised plating for weather resistance.
Pin Height: 100mm.
Fixing Slots: 11mm x 22mm,
Fixing Slots Centre to Centre: 80mm.
R 205,85 Inc VAT R 179,00 Exc VATAvailable 5-10 DaysPart No.8452 -
Beacon Bracket suitable for John Deere - Supplied with weather rubber cap for when beacon not in place.
Anodised plating for weather resistance.
Pin Height: 95mm.
Fixing Hole : 8mm
Fixing Holes Centre to Centre: 38mm.R 205,85 Inc VAT R 179,00 Exc VATIn stockPart No.8450 -
Rotating Warning Beacon suitable for John Deere - For Negative Earth Tractors
Fixed Pin Fitting.
Pin Fitting : 24mm.
Overall Height: 236mm.
Diameter: 128mm.
12V H1 Halogen Bulb.
Impact Resistant Lens.
E Approved.
Replacement Bulb - Agriline Ref: 9368R 572,70 Inc VAT R 498,00 Exc VATAvailable 5-10 DaysPart No.54028 -
Rotating Warning Beacon suitable for John Deere - Flexible Stem.
Pin Fitting : 24mm.
Overall Height: 315mm.
Diameter: 127mm.
12V H1 Halogen Bulb.
Impact Resistant Lens.
Operating Temperature -30° to 50°.
E Approved.
Replacement Bulb - Agriline Ref: 9368Currently unavailablePart No.A-186 -
Beacon Bracket suitable for John Deere - Supplied with weather rubber cap for when beacon not in place.
Anodised plating for weather resistance.
Pin Height: 100mm.
Fixing Slots: 11mm x 22mm,
Fixing Slots Centre to Centre: 55mm.
R 185,15 Inc VAT R 161,00 Exc VATAvailable 5-10 DaysPart No.8451
