John Deere 55 Series, Classic 2855 Electrical PARTS
Starter Motors
-
Starter Motor - 12V, 2.7Kw (Mahle) suitable for John Deere - AL70850 AL41247 AL62690 Teeth: 10
Tooth Pitch: 12.29mm
Flange Ø: 82.5mm
Mounting Angle: -45°
Number Of Mounting Bores: 2
Mounting Points Diameter: 105mm
Bore Ø 1: 13.5mm
Rotation Direction: Clockwise
For Flywheel Depth: 38mm
R 6 463,00 Inc VAT R 5 620,00 Exc VATAvailable 5-10 DaysPart No.93011 -
Gear Reduction Starter Motor - 12V, 3.4Kw (Mahle) suitable for John Deere - AL70850 AL62772 AL39700 Teeth: 10.
Tooth Pitch: 12.29mm.
Flange Ø: 82.5mm.
Mounting Angle: -45°.
Number Of Mounting Bores: 2.
Mounting Points Diameter: 105mm.
Bore Ø 1: 13.5mm.
Rotation Direction: Clockwise.
For Flywheel Depth: 38mm.
R 6 306,60 Inc VAT R 5 484,00 Exc VATOut of stockPart No.93031 -
Gear Reduction Starter Motor - 12V, 3.2Kw - AL70850 suitable for John Deere - AL70850 AL62772 AL39700Iskra PLGR Type Starter Motor.12V. 10 Teeth. 3.2kw.Out of stockPart No.77307
Alternator
-
Alternator (Less Pulley) 14V, 70 Amps suitable for John Deere - For pulley use Agriline Ref. 81281.
These alternators have a built in regulator, if your old alternator has a external regulator with plug then this will need cutting off and loop crimp ends fitted; Alternator terminals are lettered to match old A... Show MoreR 3 410,90 Inc VAT R 2 966,00 Exc VATAvailable 5-10 DaysPart No.50452
Alternator Pulley
-
Alternator Pulley suitable for John Deere - For use with Alternator Agriline Ref. 50452.
Bore: 176mm.
Outer Diameter: 92mm.
To Fit Belt (Top Edge) Width: 17mm.R 529,00 Inc VAT R 460,00 Exc VATAvailable 5-10 DaysPart No.81281
Oil Pressure Switch
-
Oil Pressure Switch suitable for John Deere - AR27977 AT85174 Oil Pressure SwitchR 218,50 Inc VAT R 190,00 Exc VATAvailable 5-10 DaysPart No.1568
Beacons
-
Beacon Bracket suitable for John Deere - Supplied with weather rubber cap for when beacon not in place.
Anodised plating for weather resistance.
Pin Height: 100mm.
Fixing Slots: 11mm x 22mm,
Fixing Slots Centre to Centre: 80mm.
R 205,85 Inc VAT R 179,00 Exc VATAvailable 5-10 DaysPart No.8452 -
Beacon Bracket suitable for John Deere - Supplied with weather rubber cap for when beacon not in place.
Anodised plating for weather resistance.
Pin Height: 95mm.
Fixing Hole : 8mm
Fixing Holes Centre to Centre: 38mm.R 205,85 Inc VAT R 179,00 Exc VATIn stockPart No.8450 -
Rotating Warning Beacon suitable for John Deere - For Negative Earth Tractors
Fixed Pin Fitting.
Pin Fitting : 24mm.
Overall Height: 60mm.
Diameter: 125mm.
12V H1 Halogen Bulb.12V / 55W , 24V / 70W.
Impact Resistant Lens.
CE Approved.
Replacement Bulb - Agriline Ref: 9368<... Show MoreR 572,70 Inc VAT R 498,00 Exc VATAvailable 5-10 DaysPart No.54028
Rotating Warning Beacon suitable for John Deere - Flexible Stem.
Pin Fitting : 24mm.
Overall Height: 315mm.
Diameter: 127mm.
12V H1 Halogen Bulb.
Impact Resistant Lens.
Operating Temperature -30° to 50°.
E Approved.
Replacement Bulb - Agriline Ref: 9368Currently unavailablePart No.A-186
Beacon Bracket suitable for John Deere - Supplied with weather rubber cap for when beacon not in place.
Anodised plating for weather resistance.
Pin Height: 100mm.
Fixing Slots: 11mm x 22mm,
Fixing Slots Centre to Centre: 55mm.
R 185,15 Inc VAT R 161,00 Exc VATAvailable 5-10 DaysPart No.8451
